24-hour service hotline:13739711047

CN   |   EN


Welcome to Hebei Nouan Technology Co., Ltd. official website!

Company address:

No. 89 Huanghe Avenue, Shijiazhuang City, Hebei Province

Company phone:


Company email:



Hebei Nuoan Technology Co., Ltd.

Since the launch of the company's products, its reliable performance, user-friendly design, reasonable price and perfect after-sales service have laid a good foundation for the company to establish a corporate image and conduct business.


Hebei Nuoan Science and Technology Co., Ltd. All rights reserved.                                                                                                   冀ICP备15009982号-1      Powerd by:300.cn


Page view

NA-1062 electric heat tracing composite eye washer

Affiliate classification
Product Details

Model: NA-1062

Material: 304 stainless steel. Thickness 3MM.

Working pressure 0.2-0.4MPA.

Process: The entire set of equipment is polished. High brightness and corrosion resistance.

Product Description: The whole machine is made of SS304 stainless steel (more than 8 nickel)



Eye-washing water-proof dust-proof device


It is made of soft rubber material, which is safer to wash eyes and prevent secondary injury. Fixed dust cover can be closed after washing eyes to prevent loss and cleanliness. (Avoid the chain-type movable dust cover is easy to lose)



Eyewash water flow regulation device

Adjustable flow device, the water flow can be adjusted at any time, effectively avoiding the instability of water pressure, etc., so that the water from the two sides can be crossed and held at a height of 203mm, and the flow rate reaches 16-18L/min. International standard requirements (please confirm that the site water pressure reaches 0.25mpa).


Eyewash filter

high-density PP + 304 double-layer filter, can filter impurities in the water, the sprayed water is aerosol-like, hug, mild.


Eyewash assembly

304 castings are finished. The 90-degree elbow is made of seamless tube and has no weld seam. It will not cause the wall to burst due to water pressure during use.


Washing the basin

Use 1MM eye-washing thickened straight-sided basin to concentrate the water and prevent splashing.


Shower basin

diameter 260mm, thickness 0.6mm, shower 360 degree rotating shower, no dead angle, large body coverage area, meet and exceed the US standard (requires height of 1524mm from the ground, the diameter of the shower reaches 508mm diameter) The flow rate of the shower reaches 180L/min, just at the height of 1524mm, reaching the coverage of 508mm in diameter, which fully meets the requirements of the American standard for the scope of eye wash.


Shower ball valve

inner diameter Φ24mm, at 0.25Mpa water pressure, the outlet flow rate reaches 172L/min), eyewash valve: inner diameter 15mm. (Two seals are added), the outlet flow rate is 24.8L/MM. The two-piece ball valve is used above and below, which is superior to one-piece ball valve. The hole diameter is large, which can meet the American standard for eyewash flow. (rushing ≧ 75.7L / min, eye wash 11.4L / min) requirements, effective and rapid flushing.


Sound and light alarm

sound and light alarm device and DCS signal upload, when someone uses the shower system or eyewash system, the water source in the pipeline flows, the sound and light alarm light will turn on or off after receiving the signal, start or stop the alarm. At the same time, the signal is uploaded to the control center for timely rescue. (Optional according to customer needs, this offer does not include sound and light alarm)


Voltage and current: AC220V, 25A current.

Explosion protection rating: Exd IICT4, IP65.



Emptying antifreeze device

The unheated part of the eye wash has an automatic emptying function to prevent freezing. The power of the electric heating cable is 6 meters * 48W / M. Electric heat tracing eyewash device with heat insulation antifreeze effect, can not improve the eye wash water temperature, suitable for use in areas below 0 °C. (Electric heating cable uses Taiwan Lijia Technology)



Insulation layer

environmentally friendly rubber and plastic materials.



Outer layer

Warning yellow PP material, can resist the corrosion of various chemicals. The ☐ housing is easy to disassemble, and the unique ABS shell design that can be customized to solve the problem of replacing the whole equipment customer due to the electric heating cable damage can directly replace the electric heating cable inside the eye washer, which is economical and truly worry-free. rest assured.



Eyewasher steel pipe

The stainless steel pipe is made of stainless steel pipe with more than 8 kinds of SS304 inside and outside polished steel pipe. The wall thickness of the pipe is 3mm.




The base of aluminum alloy (good grade 6070) is aluminum alloy die-casting, high density, high strength and pressure resistance. (304 stainless steel optional, no extra charge)



Inlet and outlet

5/4 inch threaded connection, can be customized according to requirements. Can be customized according to requirements.




It has good performance against corrosive solutions such as acid, alkali, salt and oil.




It is used in petroleum, chemical, beverage, pharmaceutical and other industries. When chemical liquids, toxic and harmful substances occur, and fires splash on the body, face and eyes of workers, they can be quickly washed to reduce the degree of damage.


Optional configuration: emptying device; 316 material; flange connection; reducer joint; water source filter; foot pedal.

standard: in line with the US ANSI Z358.1.2014 standard.

packaging specifications: carton packaging (74 * 28 * 23), 1 / box.

Corresponding parameter set not found, please add it in property template of background
Key words
Previous article
Next article