Company address:
No. 89 Huanghe Avenue, Shijiazhuang City, Hebei Province
Company phone:
13739711047
Company email:
hbnakj@163.com
Alibaba
Hebei Nuoan Technology Co., Ltd.
Since the launch of the company's products, its reliable performance, user-friendly design, reasonable price and perfect after-sales service have laid a good foundation for the company to establish a corporate image and conduct business.
Mobile
Hebei Nuoan Science and Technology Co., Ltd. All rights reserved. 冀ICP备15009982号-1 Powerd by:300.cn
PRODUCT CENTER
BAUER BAUER100 mobile breathing air compressor
Technical Parameters ：
|
model |
BAUER100-TE |
|
medium |
air |
|
Intake pressure |
Atmospheric pressure |
|
Inflation pressure |
PN300 |
|
Safety valve pressure |
330bar |
|
Working pressure |
300bar |
|
Ambient temperature |
+5---+45℃ |
|
Altitude allowable range |
0—2000m AMSL |
|
Maximum inclination |
5° |
|
Design |
Open |
|
Voltage |
380V，50Hz |
|
Standard compressor lubricant |
Synthetic oil |
|
Oil change interval |
Every two years or 2000 hours |
|
Compressor system |
|
|
model |
BAUER100-TE |
|
flow |
100L/min |
|
filtering system |
P11/350 |
|
Cooling air flow requirements |
792㎡/h |
|
Sound pressure |
86 dB（A） |
|
weight |
45 kg |
|
Size (length * width * height) |
860（L）*340（W）*400（H）mm |
|
switch |
Phase sequence protection switch |
|
drive |
Three-phase motor |
|
power |
2.2KW |
|
Voltage |
380V，50Hz |
|
Rotating speed |
2850 rpm/min |
|
Protection level |
IP55（TEFC） |
1. Measure the cylinder when charging from 0 to 200 bar at an ambient temperature of 20 °C
2. Size and weight are standard equipment.
The BAUER100 compressor mainframe has the following features:
Splash lubrication
Micro dust intake filter: 10mm
Intermediate stage cooler, air cooled
Final cooler, air cooled, outlet temperature 10-15 degrees higher than ambient temperature
Intermediate stage oil-water separator after each stage (except one level)
Final oil-water separator
Safety valves at all levels (sealed)
Final stage pressure maintaining valve and check valve
|
flow |
100 L/min |
|
Rotating speed |
2300 rpm/min |
|
Compression series |
3 |
|
Number of compression cylinders |
3 |
|
First stage bore |
60mm |
|
Secondary bore |
28mm |
|
Three-stage bore |
12mm |
|
stroke |
24mm |
|
Direction of rotation (viewed from the flywheel) |
left |
|
Motor connection |
Belt |
|
Post-stage pressure |
6-7 bar |
|
Secondary post pressure |
40-60 bar |
|
Oil pool capacity |
300 ml |
|
Oil pressure |
4.5 bar ± 1.5 bar |
1. Measure the cylinder when charging from 0 to 200 bar at an ambient temperature of 20 °C
P11 filtration system:
Final oil-water separator, physical separation
TRILEX long-life filter, the process is divided into three steps (drying; neutralization; particle filtration)
Final safety valve, mounted on the filter cartridge
Pressure/check valve, mounted on the filter cartridge
|
Air quality based DIN/EN 12021:2014 |
||
|
ingredient |
Threshold |
Baohua Air Quality |
|
Moisture |
35 mg/㎡ |
≤10 mg/㎡ |
|
Carbon monoxide |
5 ppm（V） |
According to the type of filter |
|
carbon dioxide |
500 ppm（V） |
According to intake air quality |
|
Oil |
0.5 mg/㎡ |
≤0.5 mg/㎡ |
1. Only use the special filter element of Baohua with carbon monoxide remover and the content of carbon monoxide in the intake air is not more than 25ppm.
2. The carbon dioxide in the intake air must not exceed the amount of carbon dioxide specified in DIN EN 12021:2014!
|
filtering system |
P11/350 |
|
Working pressure (standard) |
PN300 |
|
Maximum working pressure |
330bar |
|
Pressure dew point |
<-20℃，equivalent 3 mg/㎡ at 300 bar |
|
Filter cartridge capacity |
0.57L |
|
DGRL 97/23/EG |
Pressure capacity rating |
|
Air handling capacity (ambient temperature 20 ° C, working pressure 300 bar) |
130m3 |
Note: When using a filter without carbon monoxide to remove the filter. If carbon monoxide is used to remove the filter element, the air handling capacity is reduced by 4%.
Compressor control: switch, overload protection, phase sequence protection / warning light;
Product features: cylinder design, comfortable transport handle, inflatable handle socket;
Inflator
|
Filling device |
PN300 |
|
design pressure |
300 bar |
|
Valve design |
1 x inflation valve with venting function, European standard interface G5/8" DIN477, PN300 pressure valve |
|
Inflatable tube |
1 x high pressure inflatable tube 1 meter long |